![Epson WorkForce K101 Скачать руководство пользователя страница 1](http://html.mh-extra.com/html/epson/workforce-k101/workforce-k101_start-here_2418933001.webp)
Start Here
5
Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
Letter
A4
6
Replace the paper cassette cover, then gently insert the
paper cassette.
Note:
The paper may slide forward slightly as you insert the
cassette. This is normal.
7
Extend the output tray as shown.
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on your printer
1
Connect the power cable to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button to turn on the printer.
3
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and don’t
drink the ink.
Note:
The ink cartridges that come with your printer have a lower
yield due to the ink system charging process. This process is carried
out the first time you turn on your printer and guarantees better
performance.
1
Open the printer cover.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the ink cartridge holders. Press
each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
7
Close the printer cover.
8
Press the ink button to prime the ink delivery system.
Ink priming takes 4 ½ minutes.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
4
Load paper
You can load Letter-, A4-, or Legal-size paper, as well as
envelopes. For instructions on loading Legal-size paper and
envelopes, see the on-screen
User’s Guide
.
1
Pull out the paper cassette at the bottom of the printer
and lift off the paper cassette cover.
2
Slide the edge guides outward.
3
Position the guide shown below for the size of paper
you’re using.
4
Insert the paper with the glossy or printable side
facedown.
Letter
A4
Note:
Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
WorkForce
®
K101
Letter
A4