3.
Press and hold the
Connect
button on the scanner for at least 3 seconds, then release it when the
ready and
Wi-Fi lights flash alternately.
The scanner enters standby mode for WPS connection for two minutes.
4.
Press the
WPS
button on your router or access point.
The ready and
Wi-Fi lights on the scanner stay on, indicating that the scanner is connected to the
network.
5.
6.
Set up network scanning on your computer.
Parent topic:
Using WPS PIN Mode to Connect to a Network
If you have a WPS-enabled wireless router or access point that supports PIN mode, you can use Wi-Fi
Protected Setup (WPS) PIN mode to connect your scanner to the network.
1.
Set the connection mode switch on the scanner to
AP mode
.
33
Содержание WorkForce DS-40
