Note:
❏
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
❏
You can use pre-punched paper under the following conditions. Automatic 2-sided printing is not available for pre-
punched paper.
❏
Loading capacity: One sheet
❏
Available size: A3, B4, A4, B5, A5, Letter, Legal
❏
Binding holes: Do not load paper with the binding holes at the top or the bottom.
Adjust the print position of your file to avoid printing over the holes.
Related Information
&
“Paper Handling Precautions” on page 42
&
“Available Paper and Capacities” on page 42
&
“Loading Envelopes and Precautions” on page 52
Loading Paper in the Front Paper Feed Slot
You can only load one sheet of paper in the front paper feed slot. Because the front paper feed slot also serves the
output tray, you cannot load paper during printing.
c
Important:
You can load paper with a thickness of 0.08 to 0.11 mm in the front paper feed slot. However, even if the thickness is
within this range, some papers may not be fed correctly depending on their hardness.
User's Guide
Loading Paper
50
Содержание WF R8591
Страница 1: ...User s Guide NPD5100 04 EN ...
Страница 53: ...Related Information List of Paper Types on page 45 User s Guide Loading Paper 53 ...
Страница 178: ...4 Open the document cover 5 Remove the jammed paper 6 Close the document cover User s Guide Solving Problems 178 ...
Страница 221: ...7 Pull out the paper cassette User s Guide Appendix 221 ...