Epson VS250 Скачать руководство пользователя страница 158

Страница: 158 / 213

158

Parent topic:

Projector Maintenance

Related references

Projector Light Status
Projector Information Display - Info Menu

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning:

Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

Turn off the projector and unplug the power cord.

Allow the projector lamp to cool down for at least one hour.

Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.

Warning:

If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side
of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you
open the lamp cover.

Содержание VS250






















































































































































































































Результаты поиска

Содержание VS250

Отзывы:

Epson VS250, Руководство пользователя, Страница: 158 / 213

Результаты поиска

Содержание VS250

Отзывы: