4
Cautions
Caution Labels
The caution labels on the product indicate the following precautions.
CAUTION:
Do not touch the thermal head because it can be very hot after printing.
CAUTION:
Do not touch the cables in the product. Doing so can cause product malfunctions.
CAUTION
Do not connect cables in ways other than those mentioned in this manual. Different connec-
tions may cause equipment damage and burning.
Be sure to set this equipment on a firm, stable, horizontal surface. Product may break or cause
injury if it falls.
Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may
cause equipment damage or fire.
Do not place heavy objects on top of this product. Never stand or lean on this product. Equip-
ment may fall or collapse, causing breakage and possible injury.
Take care not to injure your fingers on the manual cutter
When you remove printed paper
When you perform other operations, such as loading/replacing roll paper
To ensure safety, unplug this product before leaving it unused for an extended period.
Do not connect a telephone line to the drawer kick connector or the display module connector;
otherwise the printer and the telephone line may be damaged.
Do not put your hand inside this product or touch the white flat cable during printing.
Make sure cords and foreign objects are not caught in the printer.
Do not open the covers during printing or autocutting.
To prevent a paper jam, do not prevent paper from being ejected from the paper exit, and do
not pull the paper being ejected.
