230
Related tasks
Selecting Basic Print Settings - Mac
Selecting Basic Print Settings - Windows
Loading Roll Paper
Loading Single Cut Sheets
Related topics
Paper Cutting/Ejection Problems
If your printout does not cut cleanly or does not eject into the paper basket, try these solutions:
• Replace the cutter.
• Manually cut the paper after the image is printed. Make sure the
Auto Cut
setting is turned off.
• Use your hands to lightly press the paper into the paper basket as it is ejected from the printer.
• If the paper creases as it ejects into the paper basket, close the paper basket and support the printout
with your hands before it touches the floor.
Parent topic:
Paper is Creased
If the paper is creased when it exits the printer, try these solutions:
• Make sure you are printing at normal room temperatures (59 to 77° F [15 to 25° C])
• Make sure the paper stops are flush with the edges of the paper with no gap.
• Perform an Easy Adjustment.
• Adjust the
Back Tension
setting to
High
or
Extra High
.
Parent topic:
Содержание SureColor T3470
