Aligning the Print Head
|
73
Aligning the Print Head
Follow the steps below to align the print head using the printer’s control panel. Make sure the paper source
and media type settings are correct for the type of paper loaded.
1.
Confirm that the printer is ready to print. Press
l
or
r
on the control panel to highlight
settings
and press
OK
. The
Maintenance
menu will be displayed.
2.
Press
d
to select
Head Alignment
, then press
OK
.
3.
Press
d
to select
Auto (Bi-D)
, then press
OK
.
4.
Press
OK
again to begin the head alignment. The printer will automatically align the head as it prints
the head alignment pattern. When alignment is complete, the Maintenance menu will be displayed.
Note:
See the
User’s Guide
for instructions on performing a manual head alignment.
Installing Software
Insert the software CD that came with your printer into your computer and follow the on-screen
instructions.
Connecting to Your System
You can use USB and/or Ethernet
®
network connections.
For USB connection, make sure your system has the appropriate port and that you have a standard,
shielded cable, 10 feet (3 m) long or less.
Note:
Do not connect the printer until a software installation screen prompts you to do so.
