Epson SureColor SC-T7000, Руководство пользователя

Страница: 104 / 163

Menu Descriptions
Print Queues menu
Item Description
Print Queue
* XXXXXXXXXXX (name of
queued print job) Waiting Job Name
User
Estimated Start
Time
Estimated Print
Time
Printing
Availability
Lists the estimated start time and time needed to
print the selected job.
It also predicts whether the job can be completed
without replacing paper, ink or the Maintenance
Box. Printing can proceed even if Can Not
Complete is displayed. However, the printer may
run out of ink or paper during printing.
Remote Manager and the LFP HDD Utility display
the reason for the Can Not Complete message and
allow you to hold or cancel the job.
U
“The Purpose of the Hard Disk Unit” on
page 55
The printer will only predict availability on the
basis of the amount of paper remaining if
On is
selected for Roll Paper Remaining .
The printer will not predict availability on the basis
of the amount of ink remaining when documents
are printed using LFP Print Plug-In for Office or
EPSON CopyFactory5.
Hold Queue
* View Hold
Queue XXXXXXXX
XXX (name
of held
print job) Paused Job Name
User
Paper Type
Source
Size
Reason For Hold
This option is available only if On is selected for
Store Held Job in the Setup menu,
Displays the print settings for held jobs and the
reason the job is held.
Jobs that are held because the job print settings
differ from those currently selected for the printer
can be printed as described below.
(1) Replace the paper and take whatever other
steps may be necessary to ready the device for
printing.
(2) Select Resume All Jobs .
Resume All Jobs
Press the
Z
button to resume all held jobs currently in the queue.
Saved Job Queue
*
XXXXXXXXXXX (name of
stored print job) Stored Job Name
User
Length
Pages
Paper Type
Copies
Source
Size
Estimated Print
Time
Shows the status of the selected stored job when it
was last printed.
After viewing the job, press the
Z
button to enter
the number of copies. Press the
u
/
d
buttons to
choose the number of copies and press the
Z
button to display the estimated print time and
print availability. Press the
Z
button to start
printing.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Using the Control Panel Menu
104