C
While holding the tabs of the media holding plate
on both sides, move the plate to the left and right
edges of the platen.
D
E
Set the Auto switch to Off. Take up the cut media
completely by operating the Manual switch
according to how the media is rolled.
Removing Media
!
Caution:
❏
If the media weighs more than 20 kg after
winding, you need at least two people to
remove and transport the media.
❏
Follow the instructions in the manual when
loading media or roll cores or removing media
from the take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
To prevent the media from sliding off the roll,
support the roll at its left end.
B
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
C
Lower the roll onto the roll support.
D
To prevent the media from sliding off the roll,
support the roll at its right end.
EPSON SC-S70600 series/SC-S50600 series Operator's Guide
Basic Operations
23
