background image

Page 1 of 2

EPSON

   

P

RODUCT 

S

UPPORT 

B

ULLETIN

Date:

04/23/2003

Originator:

JAM

PSB #:

PSB.2003.05.007

Authorization:

Reference:

N/A

Total Pages:

2

Product(s):

Epson Stylus Photo 2200 printer and 802.11b Wireless Print Server

Subject:

Stylus Photo 2200 printer not available in OS X Print Center

This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b
Wireless Print Server.

Reasons:

If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer
cannot be found in the Apple Print Center.

Recommendations:

Verify the current version of the firmware on the Print Server. If the version is 3.96 or lower,
update the firmware to 3.99 using the instructions listed below.

How to verify the firmware version:

Print a status sheet from the print server.  On the third line of the status sheet the firmware
version will be listed as follows:

FW Ver. WLES-

3.96

 (2002.06.05)

File location:

The firmware update file, epson10651.sea.hqx, and this bulletin are posted on the
Epson website; http://www.epson.com.

Содержание StylusRIP Professional (Stylus Photo 2200











Отзывы: