Using the Chooser to Select the Printer
After you install the printer driver, follow the steps below to
select the printer before you begin printing. You need to choose
the printer only the first time you use it or whenever you
want
to use another printer. (Your Macintosh always prints using the
last printer selected.)
Follow these steps to choose the printer:
1. Open the Chooser under the Apple menu. You see the
Chooser window.
2. If you are using the serial interface on the printer and the
printer port on the Macintosh, make AppleTalk inactive by
clicking the
Inactive
radio button. (You may have to
restart your Macintosh to disable the AppleTalk network.)
If you connected your printer to the modem port, you can
leave AppleTalk active.
3. Click the icon for your printer.
If you select the
StylusCOLOR
icon, you are prompted to
select the printer or the modem port.
If you select the
AT-StylusCOLOR
icon, a list of printers
appears to the right of the dialog box. Click the name of the
printer you want to use.
4.
Click the
Confirm
button. You see a message reminding you
that you are selecting a new printer.
5. Click
OK.
You see a confirmation box.
6. If the correct printer is shown, click
OK. You
see the Chooser
window.
Installing and Using the Printer Driver
2-5
