9. You see a screen telling you when the installation is
complete. If you installed the AT-StylusColor driver,
choose
Quit
to quit the installer and then restart your
Macintosh.
If you installed the StylusColor driver,
click Restart
to eject
the driver diskette and restart the computer.
The Installer places the Bi-D Calibration Utility in the
Stylus COLOR folder on your hard disk and places the Epson
Monitor2 utility in the Extentions folder.
If you installed the AT-StylusColor driver, you need to assign a
name to the printer as described in the next section. If you
installed the StylusColor driver, skip to “Using the Chooser to
Select the Printer.”
Assigning a Name to the Printer
To assign a name to your printer, follow these steps:
1.
2.
3.
4.
5.
6.
Double-click the
Epson Namer
icon.
If there are multiple AppleTalk zones at your site, select the
zone in which your printer is located.
Select the
AT-StylusColor
icon.
Under
Select Printer:,
select the printer name that appears.
Under
New Name,
enter a name for your printer.
Choose
Rename
and enter a new name. (You must rename
the printer.) Then choose
Done
to exit the Epson Namer
U t i l i t y .
2-4
Installing and Using the Printer Driver
