If you are connecting the printer to an AppleTalk or EtherTalk
network, you need to do the following:
1. Install the optional LocalTalk or Ethernet interface card
and connect it to the network. See Appendix A of the
Reference Guide.
2. Set up the printer as described in “Setting Up the Printer,”
below.
3. Install the printer driver as described in Chapter 2.
4. Assign a name to the printer using the EPSON Namer. See
“Assigning a Name to the Printer” in Chapter 2.
5. Use the Chooser to select the printer and select the network
type in the Control Panels. See “Using the Chooser to
Select the Printer” and “Selecting the Network Type” in
Chapter 2 for instructions.
6. Calibrate the printer to ensure that vertical lines are aligned,
as described in Chapter 3.
Setting Up the Printer
This section explains how to set up your printer before you
connect it to your computer. If you need to install an optional
interface, see Appendix A of the
Reference Guide
first.
Installing the Printer
1-3
