Black print head cleaning
(Alt + Load/Eject)
Runs a cleaning cycle for the black print head. See “Cleaning
the Print Heads” in Chapter 3.
Color print head cleaning
(Alt + Economy/Condensed)
Runs a cleaning cycle for the color print head. See “Cleaning
the Print Heads” in Chapter 3.
Using the Default Setting Mode
Additional printer functions are available through the Default
setting mode. Because the printer’s factory defaults are
designed to meet the needs of almost all users, you rarely need
to change the printer functions described in this section. If
necessary, however, you can turn on the Default setting mode
and change the settings using the control panel buttons.
The table below lists the settings you can select in the Default
setting mode. Default values are shown in bold type.
Setting
Options
Print direction
Auto
, Bi-D, Uni-D
Network interface mode
On,
Off
Auto line feed
On,
Off
Loading position
3 mm
, 8.5 mm
Interface mode
Auto I/F mode
, Parallel I/F, Serial I/F,
Option I/F
Auto interface wait mode
10 seconds
, 30 seconds
Character table
Italic U.S.A., Italic France, Italic Germany,
Italic U.K., Italic Denmark, Italic sweden,
Italic Italy, Italic Spain I,
PC437
, PC850,
PC860, PC863, PC865, PC861, PC437,
Greek, PC853, PC855, PC852, PC857,
PC866, PC869, BRASCII, Abicomp,
MAZOWIA, Code MJK, ISO 8859-7, ISO
Latin 1T, or Bulgaria
L
Verde+ Reference Guide
A5 size
Chapter 2
10-25-95
DR, pass 2-Rev1
2-6
Controlling the Printer
