8. Change the Media Type and other printer driver settings
so they are appropriate for the paper you loaded. (See your
Setup and Software Guide
for instructions.)
Loading Oversized Paper
If you are loading paper that is larger than the paper tray, you
need to pull out the paper tray extension. Follow these steps:
1. Remove the output tray and remove any paper in the paper
tray.
2. The paper tray extension acts as the rear edge guide, so
make sure the built-in rear edge guide is folded down as
shown in the illustration below.
3. Gently pull the extension out using both hands—one to
hold the paper tray in position and the other to pull out the
extension.
4. Load the stack of paper in the tray and then slide in the
extension until it meets the edge of the paper stack.
paper tray
extension
1-4
L
Verde+ Reference Guide
A5 size
Chapter 1
10-25-95
DR, pass 2-Rev1
1-6
Paper Handling
