Epson Stylus Pro GS6000, Руководство по установке и использованию

Страница: 12 / 128

12
12 | Introduction
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure
you use the equipment safely and effectively.
Setting Up the Printer
•
The printer weighs about 331 lb (150 kg) without ink or paper. Make
sure you have sufficient assistance when lifting it. See page 17.
•
Select a location with adequate ventilation.
•
Avoid locations exposed to air that is blown directly from a fan or air
conditioner. Blown air may dry the ink in the print head nozzles causing
reduced print quality.
•
Avoid places subject to rapid changes in temperature and humidity. Also
keep the printer away from direct sunlight, strong light, heat sources,
and air conditioners.
•
When setting up the printer, make sure you have enough space around
it for sufficient ventilation.
•
Place the printer on a flat, stable surface. The printer will not operate
properly if it is tilted or at an angle.
•
Avoid places subject to shocks and vibrations.
•
Keep the printer away from dusty areas.
•
Keep your entire computer system away from potential sources of
electromagnetic interference, such as loudspeakers or the base units of
cordless telephones.
•
Place the printer near a wall outlet where the plug can be easily
unplugged.
•
Use only the type of power source indicated on the label.
•
Connect the printer to a properly grounded outlet. Avoid using an
outlet on the same circuit as a photocopier or air control system that
regularly switches on and off.
•
Avoid using electrical outlets controlled by wall switches or timers.
•
Use only the power cord that comes with the printer. Use of another
cord may result in fire or electric shock.