Epson Stylus Pro 9860, Руководство пользователя

Страница: 33 / 101

D
Load the sheet into the paper insertion slot until
it meets resistance.
Align the right edge of the paper with the setting
position, and then insert the paper until it meets
resistance. When using paper sizes A4 or below,
set the paper until it reaches the bottom along the
line on the metal part under the paper insertion
slot.
PRESS THE BUTTON
appears on the LCD
panel.
Note:
Load the sheet vertically, like most magazines.
E
Press the button.
The paper moves to the start position.
F
If
ARE THESE SETTINGS OK?
appears on the
LCD panel, press the or button to select
NO and then press the button. Set the media
type and paper remaining, and then press the
button to set the media.
The previous setting appears on the LCD panel. If
the media type and paper remaining are correct,
select
YES
and then press the button.
G
If you use the paper basket, set it backward
position.
See “Using the paper basket and paper
guides” on page 36
Loading cut sheet A3 size or
larger / thick paper
When you load a cut sheet media A3 or larger or thick
paper (0.5 to 1.5 mm), follow the steps below.
Paper is normally loaded vertically.
Thick paper can be up to 762 mm in length. However,
you can load thick paper longer than 762 mm if you load
it horizontally.
A
Turn on the printer by pressing the button.
B
Press the button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is closed.
D
Press the button.
Epson Stylus Pro 9860 User's Guide
Paper Handling
33