Epson Stylus Pro 9700 Series, Руководство пользователя

Страница: 207 / 228

207
Using the Optional Auto Take-Up Reel | 207
Printing Using the Auto Take-Up Reel
Once the Auto Take-Up Reel is installed and paper is attached to it, you can
use it to take up your prints.
1. Set the
Auto
switch to
Forward
or
Backward
, depending on how you
set up the paper.
2. Send a print job to the printer. When the media blocks the sensor, the
Auto Take-Up Reel takes up the roll paper 1/4 to 1/2 turn at a time.
3. When you are ready to remove your prints, set the
Auto
switch to
Off.
4. Press the button to cut the paper.
WARNING: Do not touch
the Auto Take-Up Reel
while it is operating; doing
so may result in injury.
Turn off the Auto Take-Up
Reel before removing the
reel; if the reel operates
unexpectedly, bodily
injury may occur.