Epson Stylus Pro 7400, Руководство пользователя

Страница: 351 / 393

Problem Solver
351
8
8
8
8
8
8
8
8
8
8
8
8
Eng
li
s
h
5. Close the front cover, if necessary, then press the Power
button to turn the printer off and back on.
6. Make sure that the Paper check light is on and
PAPER OUT.
LOAD PAPER
is displayed on the LCD panel. To load the paper,
see “Using Roll Paper” on page 245 or “Using Cut Sheet
Media” on page 271.
If you do not resume printing afterwards, make sure the print
heads are in the home (far right) position. If not, turn the printer
on, wait until the print heads move to the home position, then
turn off the printer.
c
Caution:
If the print heads are not left in the home position, print quality
may decline.
Troubleshooting on the Optional Auto Take-up
Reel Unit
Try one or more of these solutions:
❏
The roll paper may not have sufficient slack around the auto
take-up reel unit. Make sure that there is adequate slack
between the roll paper and the take-up reel core. See “Loading
roll paper onto the take-up reel core” on page 261.
❏
The
Auto
switch on the auto take-up reel unit may not be
positioned for the direction you want. Select a direction using
the
Auto switch on the control box. See “Taking-up your
prints” on page 267.