Epson Stylus Pro 7000 Series, Руководство принтера

Страница: 114 / 147

7-4
7-4 | Resolving Problems
Your print appears
blurry or smeared. Print options are set incorrectly
for the media you’re using. Make sure the Print Mode or Media Type setting
is correct for the media you’re printing on.
You’re using the wrong paper
configuration setting (for
non-EPSON media). Use the control panel to register and select your
paper thickness and dry time. See page 2-21 for
instructions. If you’re using the RIP, you can set
dry time between passes in seconds.
Your paper doesn’t meet the
required specifications or
contains too much moisture. Change your paper.
You’re printing on the wrong side
of the paper or other media. If you’re using roll paper, make sure it’s correctly
attached to the spindle. See page 2-3 for
instructions. If you’re using a cut sheet, make sure
the printable side is face up.
Ink has leaked in the paper path. Wipe the paper path area of the printer with a soft,
clean cloth. See page 6-14 for cleaning
instructions.
You’re using high speed
(bi-directional) printing. Turn off the High Speed or Bi-Directional setting
in your Print Options.
Print head nozzles are clogged. Run a nozzle check and cleaning cycle (page 6-1).
The paper configuration setting is
too thin. Use the control panel to select thicker paper. See
page 2-21 for instructions.
The platen gap setting is too
narrow. Use the control panel to change the setting from
AUTO to WIDE . See page 2-18 for instructions.
Print quality problems (continued)
Problem Possible cause Solution