Printing with Windows
81
1
1
1
1
1
1
1
1
1
1
1
1
Eng
li
s
h
❏
Repeat this procedure four or five times, turn the printer off
and leave it alone overnight, and then try head cleaning again.
❏
Replace some of ink cartridges as they may be old or
damaged.
If the print quality remains a problem after you have tried these
solutions, contact your dealer. See “Contacting Customer
Support” on page 355.
Aligning the print head
If you find misaligned lines or black or white banding on the
printed data, you may be able to solve these problems by using
the Print Head Alignment utility to align the print head.
To use the Print Head Alignment utility, follow the steps below.
1. Make sure paper is loaded in the printer.
2. Click
Head Alignment
.
3. Follow the on-screen instructions.
Using Printer and Option Information
You can check or select the black ink set on the printer.
Note:
This function is supported by EPSON Stylus Pro 4800 only.
1. Make sure the printer is turned on.
Содержание Stylus Pro 4800 Portrait Edition
