manualshive.com logo in svg

Epson Stylus Photo RX640 series, Руководство по обслуживанию

Поделиться
Скачать
Epson Stylus Photo RX640 series Скачать руководство пользователя страница 25

EPSON Stylus PHOTO RX640/650

Revision A

Troubleshooting

Troubleshooting When There is Error Display

25

 

Combo print error 5 (Euro)

Photo Greeting card error 5 
(EAI)

After template printing, a different memory card 
was inserted or an image was added or deleted.

The contents of the memory card have changed. Print a new template and 
try again.

Guide Display “<OK>: Finish”

Press the OK button

Index sheet scan error
(no index sheet)

No index sheet has been set.

There is no index sheet or it is not positioned correctly.

Please check it and try again.

Guide Display “<OK>: Finish”

Press the OK button

Index sheet scan error 
(incorrect image selection 
marking)

The image selection marking on the index sheet is 
not correct.

Photos are not selected on the index sheet, or the ovals are not marked 
correctly.

Please correct and try again.

Guide Display “<OK>: Finish”

Press the OK button

Index sheet scan error 
(incorrect paper selection 
marking)

The paper type selection marking on the index 
sheet is not correct.

The paper type has not been selected or the ovals are not marked 
correctly.

Only one paper type may be selected.

Please correct and try again.

Guide Display “<OK>: Finish”

Press the OK button

Index sheet scan error 
(discrepancy between index 
sheet and card)

After index sheet printing, a different memory card 
was inserted or an image was added or deleted.

The contents of the memory card have changed. Print a new index sheet 
and try again.

Guide Display “<OK>: Finish”

Press the OK button

Scan to memory error
(fail to format)

Error has occurred in formatting the card.

A problem occurred while formatting.

Formatting canceled.

Guide Display “<OK>: Finish”

Press the OK button

Scan to memory error
(card removed)

The medium has been removed during card 
formatting.

The memory card or disk was removed.

Formatting canceled.

Guide Display “<OK>: Finish”

Press the OK button

Scan to memory error 
(no card)

Scan to memory was performed with no memory 
card inserted.

No memory card or Disk inserted.

Save canceled.

Guide Display “<OK>: Finish”

Press the OK button

Scan to memory error
(insufficient card capacity)

The memory card capacity is insufficient.

There is not enough free space on the memory card or disk.

Save canceled.

Guide Display “<OK>: Finish”

Press the OK button

Scan to memory error 
(card write-protect)

As the memory card was write-protected, save 
failed.

The memory card or disk is write-protected.

Operation canceled.

Guide Display “<OK>: Finish”

Press the OK button

Scan to memory error
(folder not created)

A folder could not be created in the memory card.

Cannot create a folder on the memory card or disk.

Operation canceled.

Guide Display “<OK>: Finish”

Press the OK button

Table 3-2. Warning List (continued)

Causes

Details

Displayed Message (TBD)

Recovery Procedure

Содержание Stylus Photo RX640 series








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды