Epson Stylus Photo 900, Основы работы с принтером

Страница: 99 / 120

Solving Problems
99
Roll paper doesn’t feed correctly
or jams in the printer.
■
Cut the end of the paper
straight across. If it’s cut
diagonally, the paper won’t feed
smoothly.
■
If the roll paper end is curled,
place the end inside a folded
sheet of paper and roll it
backwards against the curl.
■
As you load the paper, gently
hold it in the roll paper feeder
with your hand; don’t force the
paper into the feeder.
■
Select
Roll
or
Roll Paper
as the
Source or Paper Source in your
print settings. If you select
another setting, too much paper
will feed.
■ If extra paper feeds, press the
roll paper button for three
seconds to rewind the paper
(repeat if necessary to back it all
the way out). If the
paper
light is on, press the paper
button to turn it off. Reload the
paper as described in “Loading
Roll Paper” on page 14.
CD/DVD Printing
Problems
Images and text are not centered
on the CD/DVD.
Adjust the print position as
described in “Adjusting the Print
Position” on page 57.
Ink smears on the CD/DVD or
printing is too light.
Adjust the print density as described
in “Adjusting the Print Density” on
page 59. You can also adjust the
brightness or contrast, as described
in “Designing CDs and DVDs” on
page 49.
Make sure you’re using ink-jet
printable CDs.
Printed CDs or DVDs are dirty.
Clean the roller as described in
“Cleaning the Roller” on page 48.
The paper light flashes quickly.
Make sure the paper thickness lever
is set to the
position; see
“Inserting a CD or DVD” on
page 53.