FCC Compliance Statement
57
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Scanning
Film type
Color negative film
Color positive film (strip)
Color positive film (mount)
Monochrome negative film
Film scan unit
35mm film: Maximum 6 images per strip
Slides: Maximum 4 (color positive slides only)
Scanning
resolution
1200 dpi (main scan)
2400 dpi with Micro Step Drive
™
(subscan)
Output
resolution
50 to 4800, 7200, and 9600 dpi (50 to 4800 dpi in 1 dpi
increments)
Scanning
speed
Approximately 30 msec per line at 1200 dpi (color)
Approximately 10 msec per line at 1200 dpi (monochrome)
Image data
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
Interface
One USB 2.0 Hi-speed or USB 1.1 port
Light source
RGB three color LED
Standards and Approvals
Safety
UL 60950; CSA C22.2 No. 60950
EMC
FCC part 15 Subpart B class B; CAN/CSA-CEI/IEC CISPR 22
CX7700.book Page 57 Wednesday, July 27, 2005 5:57 PM