Epson Stylus CX4100 Series, Руководство пользователя, Страница: 94 / 127

98
■
For Macintosh, set the Quality/Speed slider to
Speed
.
■
If the Stylus CX is connected to a USB hub, disconnect unused USB devices.
Print Quality Problems
You see banding (light lines).
■
The print head nozzles may need cleaning. See Cleaning the Print Head
■
Select a higher Quality Option or Print Quality and turn off
High Speed
mode.
See Printing in Windows or Printing with Macintosh OS X.
■
Make sure the paper Type or Media Type setting matches the paper you loaded;
see Selecting the Correct Paper Type for guidelines.
■
Make sure the printable side of the paper is face up. It’s usually brighter or whiter.
■
The ink cartridges may need replacing. See Replacing an Ink Cartridge
■
If you have a Macintosh, try using Automatic mode. See Printing with Macintosh
OS X for instructions.
■
Run the Print Head Alignment utility.
■
If a dotted line appears in the image, clean the scanner glass with a soft, dry,
lint-free cloth (paper towels are not recommended), or use a small amount of glass
cleaner on a soft cloth, if necessary.
Don’t spray glass cleaner directly on the
glass. See Cleaning the Stylus CX for details.