Specifications
Page 175
Control Panel Settings
You can change the following default settings from the printer’s
control panel:
Changing control
panel settings
Follow these steps to change the settings listed above:
1
Make sure the printer is turned off and has paper loaded (at
least 8.27 inches [210 mm] wide).
2
Hold down the
R
cleaning button and press the
P
power
button. The printer prints a summary of instructions for
changing settings and choosing a language for the instructions.
3
Press the
E
load/eject button to print a list of current settings
(indicated with arrows) and additional instructions.
4
After you make the changes you want, turn the printer off to
save the settings. The settings remain in effect until you change
them again.
Setting
Options
Font
Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
Character table
Italic U.S.A., Italic France, Italic Germany, Italic
U.K., Italic Denmark 1, Italic Sweden, Italic Italy,
Italic Spain 1, PC 437 (U.S./Standard Europe),
PC850 (Multilingual), PC860 (Portuguese), PC861
(Icelandic), PC863 (Canadian-French), PC865
(Nordic), Abicomp, BRASCII, Roman 8, ISO Latin 1