Epson Stylus Color 640 Скачать руководство пользователя страница 135

Страница: 135 / 166

Troubleshooting

Page 135

Paper doesn’t feed

Paper jams inside the printer

Try this

Then do this

Remove the stack of
paper from the sheet
feeder.

Check that the paper:

◗

Isn’t curled or creased.

◗

Isn’t too old (see

Media Loading and Handling Guidelines

or your

paper packaging for more information).

◗

Isn’t loaded above the arrow on the left edge guide.

◗

Isn’t jammed inside the printer. (If the

paper out light is flashing,

paper is jammed.)

Then reload the paper as described in

Media Loading and Handling

Guidelines

, making sure the left edge guide is adjusted to fit the paper’s

width.

Try this

Then do this

Turn off your printer,
open the cover, and
remove all the paper
that’s inside, including
any small pieces that
may have torn off.

Reload the paper as described in the

Printer Basics book and

Printing on

Special Media

. If your paper jams frequently, make sure you:

◗

Use smooth, high-quality paper, loaded printable side up.

◗

Fan the stack and then even the edges before loading it.

◗

Don’t load paper above the arrow mark on the left edge guide.

◗

Place the paper against the right edge guide and adjust the left edge
guide to fit the width of your paper.

Содержание Stylus Color 640







































































































































































Результаты поиска

Содержание Stylus Color 640

Отзывы:

Epson Stylus Color 640, Руководство пользователя, Страница: 135 / 166

Результаты поиска

Содержание Stylus Color 640

Отзывы: