Epson Stylus Color 200, Руководство пользователя

Страница: 67 / 133

Hold down Cleaning as you turn on the printer;
then press Load/Eject while the Ink Out and Paper
Out lights are flashing. Send a print job. To exit hex
dump mode, wait until all pages print and turn off
the printer.
Using the Default Setting Mode
Additional printer functions are available through the Default
setting mode. Because the printer’s factory default settings are
designed to meet the needs of almost all users, you rarely need
to change the additional printer functions listed below. If
necessary, however, you can turn on Default setting mode and
change the settings using the control panel buttons.
❑
Character table . Selects the set of characters and symbols
that can be printed. The default is the Italic U.S.A. character
table. If you commonly use a language containing accents,
symbols, or other characters not available in the Italic
U.S.A. character table, change to a different character table.
For a list of available character tables, see Appendix B.
❑
Print direction . Specifies how the print head moves across
the page. The options are Uni-D, Bi-D, and Auto (default).
When Uni-D is on, the print head prints in only one
direction to provide the most precise alignment for
graphics and text. In Bi-D printing, the print head prints in
both directions. Bi-D is faster, but the vertical alignment
may not be as precise as Uni-D. When Auto is selected, the
printer switches automatically between Uni-D and Bi-D as
necessary when it receives data.
❑
Network interface mode
. If you’re having trouble printing
when the printer is connected to multiple computers, turn
on network interface mode. By default, network interface
mode is off.
4-8
Controlling the Printer