Epson Stylus C84WN, Руководство по установке и настройке

Страница: 40 / 68

40
Installing and Configuring the Software for Macintosh
14. Follow the instructions on the screen to install the wireless utilities. At the last
screen click
Done
.
You see the Wireless Server
Search window:
Continue with the instructions in
the next section to configure the
print server.
Configuring the Print Server
Follow these steps to configure the print server for your Macintosh:
1. On the Wireless Server Search
screen, click
START
.
WP-Admin picks up the signal from the print server and displays information
like the following:
Note:
If WP-Admin fails to pick up a signal from the print server, try holding down the
print server’s test button for at least five seconds to reset it. The lights go out, then
both the green and yellow lights on the print server come on briefly. The yellow
light remains on when your network has a connection to the print server.
If it still fails to pick up a signal, check the solutions beginning on page 45.
If WP-Admin picks up a signal from more than one print server, select the
connection that matches the MAC address on the back of your print server.
2. Check the signal strength to make sure you have a strong link to the print
server.
3. When you have a link, click
STOP
, then click
CONFIGURE
.
This information
appears when the
server is found This number
indicates the
signal strength