Setting Up Additional Computers
33
If it fails to print, try the following:
■
Make sure that the printer and print server are connected and that
both are on.
■
Check the printer to see if a red light is on or flashing, indicating that
paper or ink is out, or paper is jammed. See
Printer Basics
for details.
■
Check WP-Admin to make sure you have a signal (see page 24).
■
Make sure you entered the correct IP address and server name in step 5.
Now you’re ready to print. For instructions, see
Printer Basics
.
Setting Up Additional Computers
You need to install the EPSON Stylus C84WN printer driver and configure a
network port on every computer using the printer.
1. Make sure your computer’s wireless mode is set to either
Infrastructure
, if
you are connecting to the printer through an access point, or
802.11b Ad
Hoc
, if you are connecting without an access point.
If your wireless adapter doesn’t include an
802.11b Ad Hoc
option, select
Ad
Hoc
,
Computer-to-Computer
, or whatever mode your card or adapter uses
to communicate without an access point.
Do not
select a pseudo ad hoc or
proprietary ad hoc mode.
2. If you’re using infrastructure mode, make sure there is a link with good signal
strength between the computer and the access point.
3. Insert the printer software CD-ROM.
4. On the Installation Program window, double-click
Install EPSON Stylus
C84WN Printer Driver
and follow the instructions on the screen to install
the driver.
5. If you’re using Windows Me or 98, double-click
Install EpsonNet Direct
Print Utility
and follow the instructions to install this utility.
6. Click the
button to exit the Installation Program window.
Содержание Stylus C84WN
Страница 1: ...EPSON Stylus C84WN Setup and Installation ...
Страница 10: ...10 Introduction ...
Страница 60: ...60 Configuration Settings ...