Macintosh
®
OS 8.6 Users
Read This First
The Start Here sheet software installation instructions will not work in Mac OS 8.6. Unpack and
connect your printer as described on the Start Here sheet, then follow the steps below.
Install your printer software:
1.
Make sure your printer is on, then turn on your Macintosh. Insert the EPSON CD-ROM in your
drive. If the CD window doesn’t open automatically, double-click the
EPSON
CD-ROM icon.
2.
Scroll down in the CD-ROM window and double-click the
Drivers
folder. Then double-click the
C84 Software Installer
icon.
3.
Click
Continue
, click
Install
, then click
Continue
. When the installation is complete, click
Restart
to restart your computer.
4.
Open the Chooser.
5.
Click the
C84 Series
icon, click your USB port, and turn on background printing.
6.
Close the Chooser.
Install your optional software and manual, and register your printer:
1.
Double-click the
EPSON
CD-ROM icon, if necessary. Scroll down in the CD-ROM window and
double-click the
Titles
folder.
2.
Double-click the
Film Factory
folder, then double-click the
Film Factory Installer
icon and
follow the instructions on the screen to install Film Factory.
3.
When the installation is complete, close the Film Factory folders.
4.
Open the
Titles
folder again and double-click the
Manual
folder. Double-click the
Manual
Installer
icon to install the EPSON Printer Information Center.
5.
Close the Manual and Titles folders, then double-click the
Drivers
folder and double-click the
Ereg
folder. Double-click the
EpsonReg
icon and follow the instructions on the screen to register
your printer.
6.
At the last screen, click
Done
or close your browser. Then remove the CD-ROM.
You’re ready to start printing! See the details in your Printer Basics book.
© 2003 Epson America, Inc.
8/03
CPD-17000
4047354-00
Printed in USA/Imprimé aux É.-U.
MRMac8-6.fm Page 1 Friday, September 12, 2003 4:21 PM
