Epson Stylus C80WN, Руководство по установке и настройке

Страница: 40 / 67

36
Installing Software and Configuring the Print Server
■
If you want your AirPort network to be password protected, you need to change
your password to a hexadecimal value. Follow the instructions beginning on
page 46 to install and configure your software.
If Your Macintosh Has a Non-AirPort Wireless Adapter
Do the following if your Macintosh has a non-AirPort wireless adapter:
■
Make sure your Macintosh computer’s wireless mode is set correctly. Set it to
Infrastructure
if you are connecting through an access point, or
802.11b Ad Hoc
if
you are connecting without an access point. If your adapter does not include an
802.11b Ad Hoc
option, set the wireless mode to
Ad Hoc
,
Computer-to-Computer
,
or whatever mode your adapter uses to communicate without an access point. Do
not select a pseudo ad hoc or proprietary ad hoc mode. See the documentation for
your wireless adapter for details.
■
If you’re using infrastructure mode, make sure there is a link with good signal
strength (greater than 50 percent) between the Macintosh and base station or
access point. See your wireless adapter’s documentation for details.
■
If you’re configuring the print server from a Macintosh with a non-AirPort
wireless adapter, make sure WEP (Wired Equivalent Privacy) is disabled before
you begin. See the documentation for your wireless adapter for instructions.
Installing and Setting Up On the First Macintosh
To set up printing on the wireless network, install the wireless configuration utility
and configure the print server on your first Macintosh. You also need to install the
EPSON Stylus C80 printer driver to print from this Macintosh.
Installing the Printer Driver
Follow these steps to install the printer driver:
1. Insert the printer CD-ROM in your drive.
2. Double-click the
Printer Driver Installer
folder in the EPSON window. (You may
have to double-click the
EPSON
icon on your desktop if the window doesn’t
open automatically.)