17
Installing Software and
Configuring the Print Server
This chapter explains how to install the software you need to configure the EpsonNet
802.11b Wireless Print Server and use it on a Windows or AppleTalk network. It also
explains how to set up additional computers to use the printer on a wireless network.
Your printer CD-ROM includes the following software:
■
EPSON Stylus C80WN printer driver
You must install the printer driver on every computer that uses the EPSON Stylus
C80 printer. This software controls print settings, lets you monitor the printer’s
status, and provides several utilities for printer maintenance. For instructions on
using your printer driver, see the
Printer Basics
book.
■
EpsonNet Direct Print
This software, which sets up a network printer port, must be installed on every
Windows Me, 98, or 95 computer that uses the printer.
■
WP-Admin
This utility lets you configure the print server for most network protocols. For
most networks, it is the only configuration utility you need to install.
■
XAdmin32
This utility lets you configure the print server for a Novell
®
NetWare network
and perform more advanced configuration for other protocols.
Your print server also comes with a built-in web-based configuration utility, which
enables you to change configuration settings from any computer on the wireless
network that supports a standard web browser. You must configure the print server
using WP-Admin or XAdmin32 before you can use this utility.
To use the print server’s built-in configuration utility, just start your
web browser and enter the print server’s IP address in the
browser’s Address box.
For more information about the print server’s built-in configuration
utility or XAdmin32, visit EPSON’s web site at support.epson.com.
XAdmin32 also provides on-screen help.
Содержание Stylus C80WN
Страница 1: ...EPSON Stylus C80WN Setup and Installation ...
Страница 20: ...16 Setting Up Your Printer ...
Страница 60: ...56 Appendix A Configuration Settings ...