Epson SQ-2000, Руководство по эксплуатации

Страница: 161 / 181

Figure E-6, Location of parts for
tractor
unit
The two wheels, or sprockets, on the tractor unit must be
moved to match the width of the paper you use. The paper feeds
through these sprockets using the holes near the paper’s two side
edges.
Move the left sprocket by releasing its locking lever. Place the
sprocket about a quarter of an inch from its left-most position.
Then lock it back.
Release the locking lever of the right sprocket and move it to
the place you expect the holes on the right side of the paper to
line up. Leave it unlocked for
now.
Now raise the paper-holding covers on both the sprockets as
they appear in Figure E-6.
Feed the paper under the paper separator (Figure E-7) and into
the paper slot behind the platen. Push the paper through until it
comes up between the paper pressure bar and in front of the
platen.
E-5