manualshive.com logo in svg

Epson SC-S40600 Series, Руководство пользователя

Поделиться
Скачать
Epson SC-S40600 Series Скачать руководство пользователя страница 78

SC-S80600L Series/SC-S60600L Series

B

Insert the waste ink tube into the mouth of the
new Waste Ink Bottle and place the Waste Ink
Bottle in the holder.

Tightly seal the lid on the used Waste Ink Bottle.

c

Important:

You will need the lid for the Waste Ink Bottle
when disposing of waste ink. Keep the lid in a
safe place; do not throw it out.

C

Press the 

Z

 button.

D

Check again to confirm that a fresh Waste Ink
Bottle is correctly placed and then press the

Z

button to reset the waste ink counter.

c

Important:

Be sure to confirm that the waste ink tube is
inserted in the mouth of the waste ink bottle.
Ink will spill onto the surrounding area if the
tube is not inserted in the bottle.

Leave the waste ink in the Waste Ink Bottle for disposal;
do not transfer it to another container.

Note:

Note the following points when transferring waste ink
from the Waste Ink Bottle to another container.

❏

Use a container made of PE (polyethylene) when
transferring the waste ink.

❏

Attach the spout included with the printer to the rim
of the Waste Ink Bottle and transfer the waste ink.

❏

Pour the waste ink carefully. Pouring the waste ink
quickly may cause it to spill and splatter.

❏

Securely close the lid of the container to which you
transferred the waste ink and store it in a location
that is not exposed to open flames.

Disposing of used waste ink and Waste Ink Bottle 

U

“Disposal” on page 84

Replacing Maintenance
Parts

Preparing and Replacement 
Timing

When "Maintenance parts are nearing end of life." is
displayed

Prepare a new Maintenance Parts Kit as soon as
possible.

When you want to replace the parts at this stage due to
night operations and so on, select 

Replace Parts

 from

the setup menu, and then replace the parts. If you
perform the replacement without selecting 

Replace

Parts

, the maintenance parts counter will not operate

correctly.

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series     User's Guide

Maintenance

 

78

Содержание SC-S40600 Series






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды