manualshive.com logo in svg

Epson SC-S40600 Series, Руководство пользователя

Поделиться
Скачать
Epson SC-S40600 Series Скачать руководство пользователя страница 65

D

Soak a soft cloth in water, wring it out
thoroughly, and then wipe off any ink, lint, or
dust that has adhered to the platen heater.

Carefully remove lint and dust stuck in the
groove of the platen.

E

Soak a soft cloth in water, wring it out
thoroughly, and then wipe off any lint, or dust
that has adhered to the media edge plates.

c

Important:

When media with glue has been used, wipe
away glue using a diluted neutral detergent. If
you continue printing while glue is stuck to the
rear, it may rub against the print head.

When using media with glue and when ink
adheres

Remove the media edge plates from the printer,
and clean the front and back of the plates.

When stains are removed, be sure to attach the
plates to their original positions.

Removing and attaching the media edge plates

U

 

“Replacing the media edge plates” on

page 81

Performing Regular
Cleaning

Clean the parts in the following order.

Moving the Print Head

Cleaning Around the Print Head

Cleaning Around the Caps

c

Important:

The following message is displayed on the control
panel display if cleaning has not been performed for
one month. When the message is displayed, perform
regular cleaning as soon as possible.

Press 

#

 and perform Head Maintenance.

Using ink cleaner

Only use ink cleaner to clean the parts indicated in the
manual. Using ink cleaner on other parts of the printer
could damage the product.

Before starting this procedure, be sure to read the
following:

U

 

“Precautions regarding maintenance” on page 63

A

Put the cup supplied with the ink cleaner on the
metal tray, and pour approximately 10 ml of ink
cleaner into the cup.

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series     User's Guide

Maintenance

 

65

Содержание SC-S40600 Series






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды