manualshive.com logo in svg

Epson SC-S40600 Series, Руководство пользователя

Поделиться
Скачать
Epson SC-S40600 Series Скачать руководство пользователя страница 30

Basic Operations

Notes on loading media

If the following points are not observed when handling
media, small amounts of dust and lint may stick to the
media surface and cause ink drops in the print results.

Do not place exposed media directly on the floor.

Media should be rewound and inserted in its original
packaging for storage.

Do not carry media with the media surface pressed
against clothing.

Handle media in its individual packaging until just
before loading the media in the printer.

Notes on Loading Media

Caution:

❏

The heaters and media edge plate may be hot;
observe all necessary precautions. Failure to
observe the necessary precautions could result
in burns.

❏

Because the media is heavy, it should not be
carried by one person.

❏

Be careful not to trap your hands or fingers
when opening or closing the front cover. Failure
to observe this precaution could result in
injury.

❏

Do not rub your hands along the edges of the
media. The edges of the media are sharp and
can cause injury.

Load the media just before printing.

The pressure rollers may crease media left in the printer.
The media may also become wavy or curled, causing
jams or resulting in the media coming into contact with
the print head.

Do not load media if the right and left edges are
uneven.

If media is loaded and the right and left edges of the roll
are uneven, media feeding problems may cause the
media to move around during printing. Either rewind to
align the edges or use a roll without any issues.

Loading media

You can check the procedure in a video on YouTube.

Epson Video Manuals

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series     User's Guide

Basic Operations

 

30

Содержание SC-S40600 Series






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды