Epson SC-R5000 Series, Руководство пользователя

Страница: 47 / 148

Notes on loading media
When storing and handling media, be sure to observe
the following points to keep the surface of the media
free of dust and lint. Using media when there is dust
or lint on it can cause nozzles to clog and ink to come
off in the print results.
See the following for more information on handling
and storing media.
U
“Precautions When Handling and Storing Media”
on page 28
Do not place exposed media directly on the floor.
Media should be rewound and inserted in its original
packaging for storage.
Do not carry media with the media surface pressed
against clothing.
Handle media in its individual packaging until just
before loading the media in the printer.
Notes on Loading Media
Caution:
❏
The curing heater, heaters, and media edge
plates may be hot; observe all necessary
precautions. Failure to observe the necessary
precautions could result in burns.
❏
Because the media is heavy, it should not be
carried by one person.
❏
Be careful not to trap your hands or fingers
when opening or closing the printer cover.
Failure to observe this precaution could result
in injury.
❏
Do not rub your hands along the edges of the
media. The edges of the media are sharp and
can cause injury.
Load the media just before printing.
Media left in the printer may also become wavy or
curled, causing jams or resulting in the media coming
into contact with the print head. This could cause the
printer to malfunction or print quality to decline.
Do not load media if the right and left edges are
uneven.
If media is loaded and the right and left edges of the
roll are uneven, media feeding problems may cause
the media to move around during printing. Either
rewind to align the edges or use a roll without any issues.
Loading media
You can check the procedure in a video on YouTube.
Epson Video Manuals
SC-R5000 Series/SC-R5000L Series User's Guide
Basic Operations
47