E
Preheat Start/Stop
Each heater starts heating when a job is sent, and printing starts when all heaters reach a set temperature.
Press
Preheat Start
to start pre-heating each heater, and then the Pre-heater and platen heater maintain a con-
stant set temperature. The curing heater maintains a standby temperature.
Pre-heating allows you to start printing quickly once a job has been sent.
You can start/stop pre-heating for all heaters each time you press this area. Additionally, all heaters turn off
after the time set in
Heater Off Timer
in the settings menu has elapsed. Heating starts when a print job is sent,
but you can still press
Preheat Start
if necessary.
Also, if
Heater
from
Temperature
is set to
Off
in the settings menu, pressing
Preheat Start
does nothing and
pre-heating does not start. Heaters that are set to
Off
do not heat up even if a job is sent. You can make
Heater
settings for each heater.
Operating procedure
The black background area on the home screen and the startup adjustment screen does not respond even if you
press it. When you press the gray tiled area in the operation area, the screen or the value changes.
Depending on the printer's operating status, you may not be able to perform the function for every button
displayed at the top of the screen. If the function is unavailable, the icon is grayed out and the button does not respond.
Operation areas do operations when pressed. However, when a scroll bar is displayed as shown below, you can
scroll the screen by moving (sliding) your finger up and down on the screen. You can also scroll by pressing on the
up and down icons on the scroll bar.
SC-R5000 Series/SC-R5000L Series User's Guide
Introduction
24
Содержание SC-R5000 Series
Страница 1: ...User s Guide CMP0254 01 EN ...
