Epson SC-P5000 SERIES, Руководство пользователя

Страница: 52 / 192

Printable area
This section describes the printable areas for the printer.
If the margin set in an application is larger than the
following setting values, sections beyond the specified
margins are not printed. For example, if 15 mm is
selected for the left and right margins in the printer
menus and the document fills the page, the 15 mm at
the left and right sides of the page will not be printed.
Roll Paper Printable Area
The gray area in the illustration below shows the
printable area.
When printing borderless on the left and right, the left
and right margins are 0 mm. When printing
borderless on all edges, all margins are 0 mm.
The arrow in the illustration indicates the direction of
the ejected paper.
The margins for roll paper differ as shown below,
depending on the
Roll Paper Margin setting in the
Menu.
Roll Paper Margin Settings
U
“Printer Setup Menu”
on page 108
indicates factory default settings.
Roll Paper Margin
Parameter Margin Values
Standard A
,
C
= 15 mm
*2
B
,
D
=3 mm
Top 15mm/Bottom 15mm
A
,
C
=15mm
B
,
D
=3 mm
Roll Paper Margin
Parameter Margin Values
Top35mm/Bottom15mm
A
=35 mm
C
=15mm
B
,
D
=3 mm
3mm
A
,
B
,
C
,
D
=3 mm
15mm
A
,
B
,
C
,
D
=15mm
*1 Selecting Roll Paper (Banner) in the printer
driver sets the top and bottom margins of the
paper to 0 mm.
*2 When Standard is selected, the value for
A
is 20
mm for the following paper.
Premium Glossy Photo Paper (250)/Premium
Semigloss Photo Paper (250)/Premium Luster
Photo Paper (260)/Premium Semimatte Photo
Paper (260)
c
Important:
❏
Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure
the trailing edge does not come inside the
printing area.
❏
The print size does not change even when the
margins are changed.
Cut Sheets Printable Area
When printing borderless on the left and right, the left
and right margins are 0 mm.
The arrow in the illustration indicates the direction of
the ejected paper.
SC-P5000 Series User's Guide
Basic Operations
52