Epson SC-P10000 SERIES, Руководство пользователя

Страница: 64 / 217

Using the Optional
Hard Disk Unit
Function Summary
When an optional hard disk unit or the Adobe
PostScript 3 Expansion Unit (from now on, referred
to generically as "hard disk") is installed, you can save
print jobs and then reprint them.
Extended functions
Print jobs can be viewed and managed as described
below.
Viewing Print Jobs
When there are multiple print jobs with some in the
queue, the following information can be displayed.
❏
Estimated print start time
❏
Estimated print time
Viewing and Resuming Held Print Jobs
If the source or other settings selected with the printer
differ from the settings specified in the print job, an
error will occur and printing will be suspended.
When an error occurs, printing cannot be restarted
until the printer has been readied by, for example,
replacing the paper.
However, the following types of print job can be held
temporarily on the hard disk.
Therefore, after printing all the jobs that can be
printed with the current paper, you can replace the
paper with the media specified in the held print jobs
and resume printing, making your work more efficient.
❏
Print jobs that specify sources that differ from
that selected with the printer
❏
Print jobs that specify paper types that differ from
that selected with the printer
❏
Print jobs that specify output paper sizes (widths)
that are larger than that selected with the printer
Note:
Held print jobs can be saved if On is selected for Store
Held Job in the control panel Setup menu. The factory
default setting is Off .
U
“Setup menu” on page 130
Viewing and Printing Stored Jobs
Print jobs can be stored on the hard disk and printed
at a later date.
Print jobs selected for printing at a later date can be
printed directly on the hard disk without increasing
the load on your computer.
Print jobs are saved using the printer driver.
U
“Saving Print Jobs” on page 65
Note:
Jobs printed with the following applications are always
saved to the hard disk.
❏
EPSON CopyFactory5
❏
Epson Color Calibration Utility
Print Job Management
From the Print Queues menu of the Control Panel
Detailed procedure
U
“Viewing and Printing Saved
Print Jobs” on page 67
From Remote Manager
When the printer and the computer on which the
hard disk is installed are connected over a network,
use Remote Manager.
U
“Remote Manager” on page 29
From LFP HDD Utility (Windows only)
When the printer and the computer on which the
hard disk is installed are connected by USB, you can
also perform operations from the HDD utility. You
can download the software from the Epson home page.
U
“Software on the Website” on page 28
SC-P20000 Series/SC-P10000 Series User's Guide
Using the Optional Hard Disk Unit
64