Epson SC-P10000 SERIES, Руководство пользователя

Страница: 148 / 217

E
Press the
Z
button.
When you select Auto , head alignment is
performed automatically while printing an
adjustment pattern. When adjustment is
complete, the Ready screen is displayed.
If Manual is selected, proceed to Step 6 to enter
adjustment based on a visual inspection of the
pattern.
F
Note the numbers of the patterns with the
fewest white lines or in which the white lines
are most evenly spaced.
This would be pattern "3" in the example shown
in the illustration.
G
After confirming that the ink color code is
displayed in the control panel's screen, press
the
d
/
u
buttons to select the number noted in
Step 6 and press the
Z
button.
H
Select a number for all colors, and then press
the
Z
button.
The Ready screen will be displayed once the last
number has been entered.
Paper Feed Adjust
Use this setting if you are unable to resolve banding
issues (horizontal striped lines or uneven colors) in
the standard print area (for cut sheets, the area
excluding the 1 to 2 cm strip at the bottom of the
paper) even after print head cleaning or Head
Alignment.
There are three types of paper feed adjustment. We
generally recommend using the block pattern to make
adjustments.
Block Pattern
Two types of patterns are printed, and you can make
adjustments while inspecting the patterns visually.
This is useful for adjusting printouts with an emphasis
on printing images.
Crosshairs
Two types of adjustment pattern (crosshairs) are
printed in the center of the paper, and the distance
between the adjustment patterns is measured. This is
useful for adjusting printouts with an emphasis on
printing dimensions and lengths (CAD and so on).
Value
Adjust within a range of -0.70 to + 0.70%. Use this
when you want to move a little from the current print
position.
Selecting Paper Feed Adjust
This section explains how to select Paper Feed Adjust
items from the control panel.
A
Correctly load roll paper or cut sheet larger
than A4 size so that printing is possible.
Load roll paper to do adjustments using the
crosshairs.
U
“Loading and Removing the Roll Paper” on
page 31
U
“Loading and Removing Cut Sheets” on
page 38
B
Press the
l
/
r
buttons to select the Paper tab
(
.
), and then press the
Z
button.
The Paper menu will be displayed.
C
Press the
d
/
u
buttons to select Custom Paper
Setting
, and then press the
Z
button.
D
Press the
d
/
u
buttons to select the paper you
want to adjust, and then press the
Z
button.
E
Use the
d
/
u
buttons to select Paper Feed
Adjust , and then press the
Z
button.
For the next procedure, see each adjustment item.
U
“Block Pattern” on page 149
U
“Crosshairs” on page 149
U
“Value” on page 150
SC-P20000 Series/SC-P10000 Series User's Guide
Maintenance
148