Item
Parameter
Explanation
Print Nozzle Pattern
Off
Choose the frequency with which the printer prints a nozzle test pattern:
never (
Off
) or once every
1
to
10
pages. Periodic test patterns will not be
printed while
Off
is selected. To print a test pattern at the top of every 1 to
10 pages, select an option between
1
and
10
. When printing is complete,
you can visually inspect the pattern to determine whether there may be
faint or missing colors in the preceding or following printout.
1 to 10 pages
Periodical Cleaning
Light
Off, 1 to 240 hours
Choose the strength and the frequency - never (
Off
) or after
1
to
240
hours
- with which the printer performs head cleaning. Periodical Cleaning will
not be performed while
Off
is selected. If a value between
1
and
240
hours
is selected, auto head cleaning will be performed after the specified
number of hours. If printing is in progress when the specified time has
elapsed, Periodical Cleaning will only be performed after printing is
complete or the printer is reactivated.
The following reset the timer:
❏
Choosing a setting time for this item.
❏
When head cleaning was performed using All Nozzles at a strength
that is the same as or higher than the setting selected for this setting.
Note that even when
Off
is selected for Periodical Cleaning, the printer will
automatically clean the print head at a fixed interval after printing to keep
the nozzle from clogging.
Medium
Heavy
Power
Cleaning Cycle
Off
Choose the frequency with which the printer performs auto head
cleaning: never (
Off
) or once every
1
to
10
pages. The Cleaning Cycle will
not be performed while
Off
is selected. Select
1
to
10
to perform head
cleaning before the specified number of pages is printed.
1 to 10 pages
Heat Off Timer
*1
15 to 240 minutes
You can turn off the after heater automatically when no errors are
detected and no print jobs are in progress. This option is used to choose
the interval before the after heater turns off automatically.
The printer will enter sleep mode when the Heat Off Timer expires. In sleep
mode, the control panel turns off and the internal motors and other
components consume less power.
To reactivate the control panel display, press any button in the control
panel except the
P
button. The control panel display will however turn off
again if no operations are performed for another 30 seconds under these
conditions. The printer and heaters are only fully reactivated when a print
job is received, the media loading lever is used, or another operation
involving printer hardware is performed.
Sleep Mode
15 to 240 minutes
The printer will enter sleep mode if no errors have occurred, no print jobs
have been received, and no actions are performed on the control panel for
an extended period of time.
This setting selects the amount of time until the printer enters sleep mode.
Restore Settings
Yes
Select
Yes
to restore all items in the
Printer Setup
menu to their default
settings.
No
The Maintenance Menu
The Maintenance menu can be accessed directly by pressing the
#
button.
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Using the Control Panel Menu
116
Содержание SC-F7000 Series
Страница 1: ...User s Guide CMP0048 01 EN ...
