4. Usage
S5U1C31D50T1 Manual
Seiko Epson Corporation
11
(Rev.2.0)
4.2 Debugging Software
Connect the S5U1C31D50T1 board with PC via a debug probe either IAR Systems I-jet or SEGGER J-Link (See
Figure 4.1 or 4.2).
Figure 4.2.1 Connection Diagram of S5U1C31D50T1 and I-jet
USB Cable included
with I-jet
20 Pin Cable included
with I-jet
I-jet
(IAR Systems)
S5U1C31D50T1
ARM-20 Adapter
included with I-jet
Connect T2 to T5 via a cable
when supplying power from
debug probe..
Connect PC to CN3 via
the debug probe and the
conversion connector.
Remove a jumper plug
from J12 when supplying
power from debug probe.
Conversion Connector
included with S5U1C31D50T1
Содержание S5U1C31D50T1
Страница 1: ...Rev 2 0 CMOS 32 BIT SINGLE CHIP MICROCONTROLLER S5U1C31D50T1 Manual S1C31D50 Evaluation Board ...
Страница 16: ...Appendix A Circuit Diagrams S5U1C31D50T1 Manual Seiko Epson Corporation 13 Rev 2 0 Appendix A Circuit Diagrams ...
Страница 17: ...Appendix A Circuit Diagrams 14 Seiko Epson Corporation S5U1C31D50T1 Manual Rev 2 0 ...
Страница 18: ...Appendix A Circuit Diagrams S5U1C31D50T1 Manual Seiko Epson Corporation 15 Rev 2 0 ...
