Epson S5U1C17001C, Руководство пользователя

Страница: 691 / 742

11-64
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
11 OTHEr TOOlS
11.11.8 Warning Messages and Error Messages
The following is a list of warning messages displayed by LcdUtil17.
Table 11.11.8.1 List of warning messages
No. When creating or opening a file
1 A blank document could not be created.
Cause:
A new window could not be opened because more than 100 windows are currently open.
A new window could not be opened due to insufficient memory.
Corrective action: Close windows to reduce the number of open windows to 99 or less. Close other
applications to increase available memory.
2 Unexpected file format
Cause:
The file was not in the correct lcd or bmp format. The file was an lcd file with an
unsupported driver.
Corrective action: Select a file supported by LcdUtil17.
When entering an input
3 Enter an integer value between ???? and ????.
Cause:
A value outside the allowed range was entered.
Corrective action: Enter a correct value.
4 Enter an integer.
Cause:
A nonnumeric character was entered in the edit box for integer input.
Corrective action: Enter a correct value.
Dot matrix setting window (when Preview button is pressed)
5 Invalid ????
（
???? = position
、
number of dots
、
dot size
、
pitch size
、
start COM/SEG
）
Cause: An invalid value is entered in ????.
Corrective action: Enter a correct value.
6 Invalid ??? start number or Invalid number of dots
（
??? = COM
、
SEG
）
Cause: The number of COM/SEG allowed by the driver has been exceeded, based on settings for
Start ???, dot count, and COM/SEG allocation direction.
Corrective action: Set the Start ???, dot count, and COM/SEG allocation direction in accordance with the
number of COM/SEG allowed by the driver.
No. When using [Save as]
7 Some icons/matrixes are out of LCD panel. Remove them? [OK][Cancel]
Cause:
An attempt was made to save data while an icon or dot matrix extended from the LCD
panel.
Corrective action: Move the icon or dot matrix so that it does not extend from the LCD panel or click the [OK]
button to remove the icon or dot matrix extending from the LCD panel before saving.
When creating an icon or reading a file
8 The number of the icon is exceeding 4096 pieces.
Cause:
The total number of icons exceeded the maximum value of 4096.
Corrective action: Reduce the total number of icons to less than 4096.
9 The number of the icon is exceeding 4096 pieces. Loaded the icons to 4096 pieces.
Cause:
The total number of icons exceeded the maximum value of 4096.
Corrective action: Reduce the total number of icons to less than 4096.
When creating a matrix or reading a file
10 The number of the matrix is exceeding 10 pieces.
Cause:
The total number of dot matrices exceeded the maximum value of 10.
Corrective action: Reduce the total number of dot matrices to less than 10.