Page 14
Epson Research and Development
Vancouver Design Center
S1D13L03
S5U13L03P00C100 Evaluation Board User Manual
XB1AG001
Issue Date: 2014/05/15
Revision 1.0
4.5 Host Interface
4.5.1 Direct Host Bus Interface Support
All S1D13L03 host interface pins are available on connector H1 which allows the
S5U13L03P00C100 Evaluation Board to be connected to a variety of development
platforms. For detailed S1D13L03 pin mapping, refer to the
S1D13L03 Hardware
Functional Specification
, document number xxxxxxxxxx.
The following figure shows the location of host bus connector H1. H1 is not mounted. H1
connector is optional. Therefore H1 connector is an allocated area for mounting. To use this
mounting area, it is recommended to attach the 0.1 inch x 0.1 inch, 34-pin header (17x2).
Figure 4-1: Host Bus Connector Location (H1)
For the pinout of connector H1, see “Schematic Diagrams” on page 21.
