Epson S5U13781R01C100, Руководство пользователя

Страница: 5 / 18

Introduction
S5U13781R01C100 Shield Board
Seiko Epson Corporation
5
(Rev.1.02)
1 Introduction
This manual describes the setup and configuration of the S1D13781 Shield TFT board, part number
S5U13781R01C100, which includes an Epson S1D13781 Simple LCD Controller.
The S1D13781 Shield TFT board is used to add a WQVGA (480x272) or QVGA (320x240) LCD display
(not included on the board) to a microcontroller board such as:
•
Arduino Due (or compatible) platform, see section 2.1, “Arduino Board Support
•
Some mbed compatible platforms (i.e. STM Nucleo F411RE). Note that for mbed compatible
platforms, hardware modifications to the S1D13781 Shield TFT board are required. For more
information, see section 2.2, “mbed Compatible Board Support”.
•
Infineon XMC4700 (or compatible) platform, see section 2.3, “Infineon Board Support”.
The following image shows an example usage of the S1D13781 Shield TFT board.
S1D13781 Shield TFT Board Overview
480x272 TFT Panel
Arduino Due Controller
S1D13781