Explanation of the Demo using a PC
34
Seiko Epson Corporation
S5U13781R00C100 Demonstration Manual
(Rev. 2.1)
4 Explanation of the Demo using a PC
This section describes the display demo using the UM232H USB-SPI conversion board connected to a PC.
Hardware configuration for the demo is shown in the following figure.
Figure 4-1 Constitution of Display Demo using a PC
For this demo, the display system consists of the following hardware.
PC
LCD controller: S5U13781R00C100 reference board
USB-SPI conversion board: UM232H
ATM0430D5 from XIAMEN ZETTLER
(4.3 inch, 480x272 dots, 24 bit full color TFT LCD panel)
The demo is as follows.
1. Color gradation bar display demo using the S1D13781 2D BitBLT feature
2. Still image display
In this demo, a PPM format image stored in a PC will be used as the demo still image.
The sample project provided on the EPSON web site is verified in its compilation and operation with
Microsoft Visual C++ 2010 Express compiled.
USB
SPI
RGB
TFT module
S5U13781R00C100
UM232H
PC