Epson RIP Station 5100, Руководство администратора, Страница: 75 / 140

3
3-41 Administrative functions in the Setup menu
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in Job Log Setup; select No to return to the
main Setup menu without making any changes.
Change Password
Change Password
enables you to set or change the Administrator password for the
RIP Station. This password determines whether a user can modify the Setup options.
See page 2-2 for information on Administrator access privileges.
When the RIP Station is installed, there is no password. If you do not create an
Administrator password, users are not required to enter a password to modify the
Setup. If an Administrator password has been set previously, you are required to enter
it when you run Setup. Use the up and down button to select the characters and the
left and right arrow buttons to move between them (see “Types of Setup screens” on
page 3-6).
N
OTE
:
The Operator password can be set and changed from Fiery WebSetup only.
T
O CHANGE THE
RIP S
TATION
A
DMINISTRATOR PASSWORD
:
New Password
Use the up and down button to select the characters and the left and right arrow
buttons to move between them. Enter characters from left to right, since the left arrow
line selection button is a delete key. The password can be any combination of letters
and numbers up to 19 characters. Choose OK when you have finished. Keep careful
track of the password.
N
OTE
:
The only way to remove a password that you can’t remember is to reinstall
system software.
1. Scroll the main Setup menu and choose Change Password.
2. Enter and confirm the password as described below.
3. When you have finished, save changes.
PS Setup
Color Setup
Job Log Setup
Change Password
Setup