Epson RIP Station 5100, Руководство администратора, Страница: 67 / 140

3
3-33 Printer Setup options
The RIP Station hard disk supports up to three queues (Print, Hold, and Printed).
Users may print to two of them (Print and Hold).
•
Print queue
—This is the standard RIP Station queue. The RIP Station prints jobs
from the Print queue in the order in which they were received.
•
Hold queue
—The Hold queue can be used for storing jobs that will be printed at a
later time, and jobs that will be printed repeatedly.
Because the Hold queue is a storage place for jobs, it requires intervention on the
part of an administrator or operator. In order to print a job that was sent to the Hold
queue, the job management tools must be used to move or copy the job from the
Spool area to the Print area.
You can locate Hold queue jobs in the Fiery Spooler Hold area or the
Fiery WebSpooler Spool area.
•
Printed queue
—The Printed queue is a job storage area on the RIP Station disk; it
contains the most recent jobs printed from the Print queue. The Printed queue
makes it convenient to reprint those jobs. A Server Setup option enables this queue
and governs the maximum number of jobs retained in it at any given time (see
page 3-9). Reprinting jobs in this queue requires the job management tools.
Printer Setup options
Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information on RIP Station print connections, see
page 2-2.
Printer Setup includes:
• Publishing the Direct connection
• Publishing the Hold queue and Print queue
• Specifying the RIP Station connection for parallel jobs when a parallel connection is
enabled